It is currently Thu Sep 19, 2019 5:33 pm


Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Making Weapons
PostPosted: Wed Oct 03, 2012 7:01 am 
Recruit
Recruit

Joined: Sun Sep 30, 2012 5:23 pm
Posts: 9
Started Fighting: 29 Sep 2014
Unit: Barbarian Nation
Favorite Fighting Styles: 1-handed with shield
Does anyone know some common places that I could get the materials to make a Blue sword and a shield


Top
 OfflineProfile  
 Post subject: Re: Making Weapons
PostPosted: Wed Oct 03, 2012 1:45 pm 
Toadie
Toadie
User avatar

Joined: Thu Mar 20, 2008 2:19 pm
Posts: 125
Location: Ventura, Ca
Started Fighting: 11 Mar 2005
Realm: Iron Isles
Unit: Forsaken
Favorite Fighting Styles: Archer
BOMB and board
Walmart sells blue foam and duct tape and dap.

As far as cores go you can try farm stores or hardware store for fiberglass rods, usually associated with electric fences. Remember if you are doing anything longer then 24 in you are going to need to use either double 3/8" fiber rods or 1/2" rods.

This of course is if you don't want to buy online.

_________________
Archer for the Forsaken
Mec Goblin
Old Goblin Proverb wrote:
Do everything you can get away with at the time.


Top
 OfflineProfile  
 Post subject: Re: Making Weapons
PostPosted: Wed Oct 03, 2012 3:02 pm 
Recruit
Recruit

Joined: Sun Feb 26, 2012 1:57 pm
Posts: 24
Started Fighting: 0- 0-2012
Favorite Fighting Styles: Sword and Board, Glaive
If you get together with some friends, or just want a lot of foam, if you order over $75.00 worth this, http://www.foambymail.com/VA.html, is a pretty good deal with free shipping. The stuff will also last longer than blue foam.


Last edited by Triton on Thu Oct 04, 2012 3:09 pm, edited 2 times in total.

Top
 OfflineProfile  
 Post subject: Re: Making Weapons
PostPosted: Thu Oct 04, 2012 1:17 am 
Slayer
Slayer
User avatar

Joined: Tue Sep 05, 2006 7:21 pm
Posts: 1061
Location: Carbondale, IL
Started Fighting: 02 Apr 2006
Realm: Carthage
Unit: Clan of the Hydra
Favorite Fighting Styles: Red Sword - S&B - Florentine
Knowing what you can afford to get and what area you are from, as well as what your relative skill level in building is, will go a long way in helping us help you. Without such information available, here then is a list of basic supplies, where to find them, and their uses:

  • Ozark Trail Camp-Pad - Wal-Mart (~$8)
  • DAP Original Contact Cement - Wal-mart (~$8)
  • Duct Tape - Wal-Mart ($6).
  • Light, durable plywood - Home Depot
  • Hardware for attaching the straps of your shield - Home Depot
  • Fiberglass Cores (bundle of 10; S&H brings cores to ~ 3.40 each) - internet
  • Alternate core, if previous unattainable - Farm and Fleet; farm/fence supply stores, ect.
  • Old seatbelts, or essentially anything strap-like will work for arm straps. Find something comfortable that you can bolt down.
  • Counterweights (cut into 3-6 inch segments) - Home Depot
  • Rope of your choosing for wrapping your handle. I prefer to use flat 1/4", but it's all about what makes your weapon feel comfortable to you.
  • Hockey Tape (not athletic tape; that's meant for skin contact, and has a weaker glue; any brand will do, really).


    Now, for your shield and sword you'll need, assuming you are only building one of each and are building a standard 26" shield and a 32" blue (great starter equipment), you will need 3 rolls of foam, 1 can of DAP, 1 roll of duct tape, 1 roll of cloth tape, 1 set of four tee-nuts (5 tee-nuts if you are doing a backstrap), bolts and washers to accompany your tee-nuts, some form of strapping for the shield, and counterweights.

    Useage notes:
    • Make sure you get the non-bubbled camp pad
    • RED CAN of DAP only; follow the instructions; allow proper drying time. For your shield, do a light coat of DAP, let it set in a minute, and apply a heavier second coating. Wood will soak up a bit on first contact.
    • If using 3/8" core, go no greater than 29" in length of core. Any greater will risk failing for flex; I've done a dozen plus builds on this core and attest that a finished weapon coming to roughly 32-33" will not flex past 45 degrees. Over time, cores do flex more, so go 27-28" if you feel more comfortable that way; 24" is unnecessarily short; do not double core. The cores will eventually separate, which will require a complete rebuild of the weapon. It is more economical in the long run to just buy 1/2" for longer blues. See this thread for a more full explanation.
    • Never use a simple nut and bolt for attaching straps. A binding nut such as a tee-nut is a must, unless you'd like to rebuild your entire shield every time a strap breaks.
    • space your counterweights as shown here. If you don't want the handle to come out oblonged, use some scrap foam, ect. to build up the sides.
    • Never tape across the blade. A single strip all the way up and over the flat will do. A simple X of cloth tape over the tip with provide additional tip stability.

Hope this helps you in your endeavours, and best of luck. And again, in the future, please be more specific with your questions. The more clearly you state what you need, the more clearly and concisely we'll answer.

Cheers,

-Thurat-

_________________
Realm of Carthage War Council Representative
Squire to Sir Morpheus of Wolfpack of the High Plains
Realm Map Curator
Master Seneschal


Top
 OfflineProfile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
GuildWarsAlliance Style by Daniel St. Jules of Gamexe.net. Modified by