Page 1 of 1
Felt Cover
Posted:
Wed Apr 03, 2013 1:27 am
by Naphtali
Has anyone ever tried glueing felt directly to the foam surface. I think it would add a bit of padding and strength. Though it may complicate any repairs. I would also think one may still want to use a cover, something that could be removed and washed.
Re: Felt Cover
Posted:
Thu Apr 04, 2013 7:48 am
by Sir Thurat
Are you thinking the synthetic felt that roofers use, or felt cloth? I'm not too familiar with either. What kind of structural integrity are you thinking that it would add?
-Thurat-
Re: Felt Cover
Posted:
Thu Apr 04, 2013 11:04 pm
by Naphtali
Felt cloth; I was thinking that it would help keep the foam from spliting.
Re: Felt Cover
Posted:
Thu Apr 04, 2013 11:08 pm
by Caleidah
If you glue it properly, there won't be a concern of it splitting.
Re: Felt Cover
Posted:
Fri Apr 05, 2013 3:03 pm
by Peanut of Loderia
Or cover it in cloth tape.
Re: Felt Cover
Posted:
Sat Apr 06, 2013 7:04 pm
by Sir Thurat
If you concern is the face foam splitting, then I would say that it would be an unnecessary step. I have a shield that is going on 7 years old, and the foam on the face is still original; no tears.