The first strip

Making Weapons and Shields

Moderator: Belegarth: Forum Moderators

The first strip

Postby Temujin » Sat Jun 07, 2014 8:27 pm

Hello, I am having some problems cutting and applying the first 1/2 strip to my swords. I have a few questions.

1. What are the effects of having a 3/4 inch instead of a 1/2 inch strip?

2. The swords I have made using 3/4 inch first strip seem to be crooked. Do you believe this to be a effect of the strip or of the appliance?

3. How can I cut 1/2 inch strips more easily? Any tips would help.

Thank you.
User avatar
Temujin
Recruit
Recruit
 
Posts: 18
Joined: Sat May 31, 2014 4:54 pm
Started Fighting: 05 May 2014
Realm: Saxum
Unit: The Dazing Star
Favorite Fighting Styles: Sword and Board
Spear

Re: The first strip

Postby Plithut » Sun Jun 08, 2014 1:09 am

Hello Temujin! Welcome to the Belegarth boards. I am not sure I understand what you are asking in your question, so I will answer to the best of my ability.

1. I imagine that the 3/4" strips that you are talking about would be slightly larger than your core in question. I would suggest leaving as little space as possible between the core and your foam, the larger the gap, the easier it will break.

2. I have a hunch that its application. If you want to get straight blades, try getting quick clamps and two flat surfaces. After applying your glue and sticking them together, put the sword in between the two flat surfaces and create a vice with the clamps, gently clamping the foam together. This usually helps getting a more flat profile.

I usually end up sanding my flats on a belt sander after everything has been glued and clamped for 48-72 hours. This is more for quality control than anything else.

3. If you want to be able to strip out foam easily, look at getting a leather belt stripper. They cut straight lines with an adjustable thickness. You can get these from any leatherworking store.


I hope this helps!
Dragoon Plithut
Sir Plithut - 17th Knight of the Highlands (Retired)
Genetically Enhanced Life Form - GELF
God Squad - Mayhem Muhammad
Hell Hammer - Slaanesh Entices
User avatar
Plithut
Grizzled Veteran
Grizzled Veteran
 
Posts: 2861
Joined: Thu Jul 31, 2003 1:42 am
Location: Portland, Oregon
Started Fighting: 01 Apr 2002
Realm: Babylon
Unit: GodSquad-HellHammer-Gelfs
Favorite Fighting Styles: Florentine and Archery

Re: The first strip

Postby Derian » Sun Jun 08, 2014 2:40 am

Plithut wrote:3. If you want to be able to strip out foam easily, look at getting a leather belt stripper. They cut straight lines with an adjustable thickness. You can get these from any leatherworking store.


Oh my god, how have I never thought of this before. I have like three of the * things lying around and I have literally never even considering this. Plithut, you're a genius.

Edit: For content, here are two options:

http://www.tandyleatherfactory.com/en-u ... 80-00.aspx
http://www.tandyleatherfactory.com/en-u ... 84-00.aspx

The first one (the wood one) may have difficulties with thicker foam. Mine is currently packed, so I can't check the maximum clearance on it right now.
- Derian -

"An octopus has eight arms, three hearts, five *, two Super Bowl rings, a beak, and the power to solve crimes."
User avatar
Derian
Become One With the Wind
 
Posts: 5969
Joined: Sat Apr 05, 2003 4:20 pm
Location: Cedar Falls, IA
Started Fighting: 01 Apr 2001
Realm: Nan Belegorn
Unit: Hellhammer
Favorite Fighting Styles: Sword & Board
Pronouns: He / Him

Re: The first strip

Postby Plithut » Sun Jun 08, 2014 11:25 am

Derian, I would like to claim credit, but I believe the first people I saw using this were Catibus and Orren from the Highlands of Chaos.

If at all possible get the Metal strap cutter, you will like the results better. You CAN use the wood ones for 1/2" foam, but you need to initially compress it a bit to get the cut started.
Dragoon Plithut
Sir Plithut - 17th Knight of the Highlands (Retired)
Genetically Enhanced Life Form - GELF
God Squad - Mayhem Muhammad
Hell Hammer - Slaanesh Entices
User avatar
Plithut
Grizzled Veteran
Grizzled Veteran
 
Posts: 2861
Joined: Thu Jul 31, 2003 1:42 am
Location: Portland, Oregon
Started Fighting: 01 Apr 2002
Realm: Babylon
Unit: GodSquad-HellHammer-Gelfs
Favorite Fighting Styles: Florentine and Archery

Re: The first strip

Postby Derian » Sun Jun 08, 2014 3:12 pm

The draw gauge (metal one) is also way better all around than the wood one, in my experience. Spend the extra $10 or whatever to pick that one up.
- Derian -

"An octopus has eight arms, three hearts, five *, two Super Bowl rings, a beak, and the power to solve crimes."
User avatar
Derian
Become One With the Wind
 
Posts: 5969
Joined: Sat Apr 05, 2003 4:20 pm
Location: Cedar Falls, IA
Started Fighting: 01 Apr 2001
Realm: Nan Belegorn
Unit: Hellhammer
Favorite Fighting Styles: Sword & Board
Pronouns: He / Him

Re: The first strip

Postby Caleidah » Sun Jun 08, 2014 6:06 pm

Off topic of the OP, but in regards to the strap cutters, you can also rotate the draw bar of the wooden cutter and wedge a utility blade into it for use on foam that is too thick to get into the slot. It's wizardry.
Knight of Grond
Palatine of the Sons of Sylas
"But in life, the young king becomes a tyrant, and leads his people to war."
User avatar
Caleidah
Boo Radley
 
Posts: 2055
Joined: Sun Jan 04, 2009 11:36 pm
Location: Central IL
Started Fighting: 03 Jan 2009
Realm: Grond
Unit: Sons of Sylas
Favorite Fighting Styles: Boot and Bottle

Re: The first strip

Postby Sir Thurat » Mon Jun 09, 2014 3:50 pm

To add to what these gents have been saying, the most important part about cutting foam is to use a sharp blade, regardless of how you are doing it. Whether by hand or strap cutter, make sure your blade is clean and sharp, or your foam will tear, or your cuts will be jagged. Clean, straight cuts make for clean and straight swords.
Realm of Carthage War Council Representative
Knight of Oldcastle
Realm Map Curator
Master Seneschal
User avatar
Sir Thurat
Skull Crusher
Skull Crusher
 
Posts: 1205
Joined: Tue Sep 05, 2006 7:21 pm
Location: Carbondale, IL
Started Fighting: 02 Apr 2006
Realm: Carthage
Unit: Clan of the Hydra

Re: The first strip

Postby Mordekiem » Tue Jun 10, 2014 10:56 am

Metal yardstick and a sharp utility knife should cut foam just fine.

a band saw would probably be overkill but might be helpful.
User avatar
Mordekiem
Recruit
Recruit
 
Posts: 23
Joined: Mon Nov 04, 2013 4:26 pm
Started Fighting: 0- 9-2013


Return to Foam Smithing

Who is online

Users browsing this forum: No registered users and 9 guests