It is currently Tue Oct 23, 2018 3:04 am


Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Plastidip questions!
PostPosted: Fri Oct 02, 2015 10:47 pm 
Recruit
Recruit

Joined: Fri Oct 02, 2015 10:25 pm
Posts: 2
Started Fighting: 01 Aug 2010
Favorite Fighting Styles: Hand-and-a-half sword, dual weapons
Hello, everyone.
I have been making gear for several years, but I have been looking into new tech, recently, as I am at a point where I am needing to rebuild most of my stuff soon, anyway.

I have heard a lot about plastidip, as I've been across the forums (Here, and elsewhere) but I always seem to come across bits of information that assume that the reader already has some knowledge of it, so I just want to ask a few questions, before investing in it.

1) I have seen a lot of plastidip shields, and am aware that they are legal. Is striking/bashing with a plastidipped shield frowned upon, or treated differently than a cloth-covered shield?

2) I have also seen mention of using plastidip in the construction of omniblades, but very few details, normally just the mention of the fact that it was done. What would this entail (Coating inner layers?) and what benefits would it provide over (or in addition to?) DAPing your foam?

3) I assume the brush-on plastidip would be generally preferable to the aerosol version, but I wanted to get confirmation on that, or where each may be useful, before buying either.

Thanks in advance, guys!
Cupcakes


Top
 OfflineProfile  
 Post subject: Re: Plastidip questions!
PostPosted: Mon Oct 05, 2015 10:45 am 
Slayer
Slayer
User avatar

Joined: Tue Sep 05, 2006 7:21 pm
Posts: 1037
Location: Carbondale, IL
Started Fighting: 02 Apr 2006
Realm: Carthage
Unit: Clan of the Hydra
Favorite Fighting Styles: Red Sword - S&B - Florentine
1. There are no special rules or practices regarding use of PDd shields in aggressive shield maneuvers. These shields are just as safe as any other.

2. The only construction use I've ever heard for PD in swords is to PD over the tip of a routed box (when sandwiching, not up-and-over type boxes), to help prevent separation and resist blow-out. I don't know if this is actually effective. See Adakan's stable tip design here for reference:

Image

3. The use of spray PD vs paint on is objective. When using paint on you'll want to thin the PD with naphtha to allow for thinner coats to promote faster drying and a smoother finish. When using spray PD, you'll need to do light coats, and you'll have to do more coats than with paint on. You'll also need to account for overspray. Some find the spray on more useful for fine detail work for filling crevasses without leaving globs of PD, and then use paint on for everything else.

Though you didn't ask about it, option three would be to get a paint gun and air compressor and use paint on PD in it. Many PD artists that do commissions use this method and find it time saving and more effective. Typically they thin the paint on PD in a 1:1 ratio with naphtha, and clean their equipment regularly to prevent the PD from gumming up the works.

For additional assistance, I highly recommend joining the Plasti Dip Artists page on Facebook. It's a collection of foamsmiths from various games that use PD in their work. Some of the best PD artists in the foam fighting community are members there, and there are handy tutorials and FAQs available there for new PD users.

Hope that helps!

_________________
Realm of Carthage War Council Representative
Squire to Sir Morpheus of Wolfpack of the High Plains
Realm Map Curator


Top
 OfflineProfile  
 Post subject: Re: Plastidip questions!
PostPosted: Mon Oct 12, 2015 12:51 pm 
Recruit
Recruit

Joined: Fri Oct 02, 2015 10:25 pm
Posts: 2
Started Fighting: 01 Aug 2010
Favorite Fighting Styles: Hand-and-a-half sword, dual weapons
Thank you very much! The information was very helpful - and I'll head over to that facebook page a little later on.


Top
 OfflineProfile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
GuildWarsAlliance Style by Daniel St. Jules of Gamexe.net. Modified by