It is currently Sat Sep 22, 2018 9:17 am


Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: PVC core punch shield?
PostPosted: Fri Jun 24, 2016 9:06 pm 
Recruit
Recruit

Joined: Fri Jun 24, 2016 8:50 pm
Posts: 2
Started Fighting: 0- 0-2015
Realm: Obsidian Hollow
Favorite Fighting Styles: Why would I give people hints?
There's tons of posts on here saying not to use PVC for a sword core because it might crack or warp under the stresses of combat. Which made me wonder

Is PVC still considered good for a handle on a coreless shield though? It's old tech and a lot of people these days are moving on to fiberglass for a shield handle core. I have a ton of half inch PVC lying around and I'd like to use it.

I'm aware that PVC as a shield handle will pass as long as it was built right, my question is can I expect it to last at least two or three years?

My coreless punch shield is 6 layers of blue camp foam everywhere except the boss. The boss is two layers of blue camp + 3 layers of 4 pound EVA foam (I also made the boss bigger than the hole for my hand so no worries). the dimensions are 2 feet wide and 3 feet long. The pipe is 30 inches, giving 3 inches of padding above and below the ends.

If this is doomed to break eventually -- well I guess I can build a new one with fiberglass rod as a handle instead.


Top
 OfflineProfile  
 Post subject: Re: PVC core punch shield?
PostPosted: Sat Jun 25, 2016 9:45 am 
Slayer
Slayer
User avatar

Joined: Tue Sep 05, 2006 7:21 pm
Posts: 1031
Location: Carbondale, IL
Started Fighting: 02 Apr 2006
Realm: Carthage
Unit: Clan of the Hydra
Favorite Fighting Styles: Red Sword - S&B - Florentine
As long as it's SCH40 or SCH80, it should fine. I've had a punch with a PVC handle since 2012, and I haven't had any issues with it.

_________________
Realm of Carthage War Council Representative
Squire to Sir Morpheus of Wolfpack of the High Plains
Realm Map Curator


Top
 OfflineProfile  
 Post subject: Re: PVC core punch shield?
PostPosted: Sat Jun 25, 2016 1:44 pm 
Become One With the Wind
User avatar

Joined: Sat Apr 05, 2003 4:20 pm
Posts: 5907
Location: Cedar Falls, IA
Started Fighting: 01 Apr 2001
Realm: Nan Belegorn
Unit: Hellhammer
Favorite Fighting Styles: Sword & Board
You should be fine. Even if the PVC does snap, you don't need to scrap the whole shield. You can simply glue in a new fiberglass core (or even another PVC one if you want to go that way).

_________________
- Derian -

"An octopus has eight arms, three hearts, five *, two Super Bowl rings, a beak, and the power to solve crimes."


Top
 OfflineProfile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: Google [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
GuildWarsAlliance Style by Daniel St. Jules of Gamexe.net. Modified by