TUTORIAL: Suit Pants to Drawstring Pants

Garb, Music, Historical Discussions

Moderator: Belegarth: Forum Moderators

TUTORIAL: Suit Pants to Drawstring Pants

Postby Dan of Nightfort » Sat Aug 31, 2013 9:03 am

Suit Pants to Drawstring Pants

Here is the look this tutorial tries to achieve:
http://www.garbtheworld.com/images/psd/g0008107b.jpg

I had read a tutorial a ways back about making hosen out of suit pants and I decided to make my own drawstring pants with the same sort of method.

I bought a bunch of 100% wool suit pants from Good Will for $3.99 each. I'm sure you can find these at thrift stores as well. The trick is to get 100% wool suit pants, preferably worsted wool. Get pants that are many sizes too big for you and too long. You will need a way to sew, a seam ripper, scissors, pins, safety pin, a pair of pants or pajamas that fit similarly to your desired result for your project, and something to use for a drawstring.

1. Start first by cutting off the whole top strip where the button/clip at the top is. You will be cutting through the belt loops too. This will allow any pleats to be freed up and get rid of most of the modern looking parts. Then remove the belt loops with the seam ripper.

http://db.tt/W3H5htvl

2. Next, you will want to zip the pants and pull the zipper piece out. If you took the zipper piece out and the zipper comes open, don't worry about it. It will work put fine.

http://db.tt/lKHR7Lzt

3. Take the buttons out of the back pockets with the seam ripper.

http://db.tt/eA6VE6hd

4. Pin the zipper area together as if the pants were zipped up. When we sew this, we don't want them to look like there was a zipper there so pin it cleanly.
http://db.tt/w5zk1B7i

5. Sew this together with one line down the front as cleanly as possible. Definitely reinforce the zipper area as much as possibly. It was the first part that ripped open for me.

http://db.tt/R5fA8WiK

6. Now go inside and cut the zipper plastic out. Be careful where you cut so as to not cut your new sewing.

http://db.tt/wB9nKOo9

7. Go and sew the back pockets closed. This will end up bring the least appropriate looking part of the garb but stay tuned for how we can address this.

http://db.tt/eArvJLxW

8. Flip the pants inside out and try them on. I also layed them out and matched them up to drawstring pajamas that fit me loosely. Lay the pants so that the existing side seam is exactly at the side. Also, get the pocket out of the way and ignore it for measuring reasons. I then measured 1 inch in and pinned it all the way down the leg. This will carry based on your size and the size of the pants. Sew up the sides while the garb is inside out until you get the size you want. Notice, this also gets rid of the side pockets.

http://db.tt/RcF3Cip7

9. Seam rip the stitching at the ankle and hem the bottom by flipping it as pictured and sewing at the length you want. Note, the pants are inside out for this part.

http://db.tt/j3rqVK0i

10. While inside out, clear some of the inside lining out by the belt line. Then, flip the belt line an inch over and sew 3/4 of an inch down to make a tube for the drawstring to fit.

http://db.tt/rEtUJyxD

11. Attach the safety pin to the end of your drawstring and use it to help you pull it through the belt line tube you just sewed after cutting 2 holes where a button would have been if these were jeans. Cut the rope so that there is only a few inches of slack when the pants are fully stretched out. Knot near each rope end.

12. Go in and cut out all the extra junk inside the pants: excess pant that is now useless, pocket material, lining you don't want, etc.

13. Try the pants on, notice the back pockets are really high up and easily concealable by a tunic, iron out the pleats and creases, and go fight somebody in your $4, 100% wool pants!

http://db.tt/nZNV3qTt
Last edited by Dan of Nightfort on Tue Sep 17, 2013 5:14 pm, edited 1 time in total.
Dan, Lord Commander of Nightfort, Barrington IL
User avatar
Dan of Nightfort
Recruit
Recruit
 
Posts: 25
Joined: Mon Aug 05, 2013 11:43 am
Started Fighting: 0- 0-2006
Realm: Nightfort - Barrington IL
Favorite Fighting Styles: Sword and Shield

Re: TUTORIAL: Suit Pants to Drawstring Pants

Postby Dan of Nightfort » Tue Sep 17, 2013 5:02 pm

Ok, so I have fought in these a handful of times now and I ripped the zipper part a little bit. I have added some text to the tutorial to say that reinforcing the zipper area well will help it stay together much longer.

Also, the knees have held up remarkably well.
Dan, Lord Commander of Nightfort, Barrington IL
User avatar
Dan of Nightfort
Recruit
Recruit
 
Posts: 25
Joined: Mon Aug 05, 2013 11:43 am
Started Fighting: 0- 0-2006
Realm: Nightfort - Barrington IL
Favorite Fighting Styles: Sword and Shield

Re: TUTORIAL: Suit Pants to Drawstring Pants

Postby Dan of Nightfort » Mon Oct 07, 2013 8:10 pm

It's been a few more weeks now and one more rip in the lower butt area. These were easy to repair but I have bought some other wool suit pants that are made of slightly thicker and seemingly more durable wool. I will update after I finish those.
Dan, Lord Commander of Nightfort, Barrington IL
User avatar
Dan of Nightfort
Recruit
Recruit
 
Posts: 25
Joined: Mon Aug 05, 2013 11:43 am
Started Fighting: 0- 0-2006
Realm: Nightfort - Barrington IL
Favorite Fighting Styles: Sword and Shield

Re: TUTORIAL: Suit Pants to Drawstring Pants

Postby Sir Thurat » Wed Oct 09, 2013 4:55 am

You may wish to consider adding a small gusset to your pattern. They make the space between the leggings a bit more "poofy", but the amount of give they add to those stress points in the crotch is totally worth it. I currently wear salwar when I fight, and the gusset in them is so ridiculously large that I never bust seams.

Thanks for keeping up on updating your results with this pattern.
Realm of Carthage War Council Representative
Knight of Oldcastle
Realm Map Curator
Master Seneschal
User avatar
Sir Thurat
Skull Crusher
Skull Crusher
 
Posts: 1205
Joined: Tue Sep 05, 2006 7:21 pm
Location: Carbondale, IL
Started Fighting: 02 Apr 2006
Realm: Carthage
Unit: Clan of the Hydra

Re: TUTORIAL: Suit Pants to Drawstring Pants

Postby Dan of Nightfort » Wed Oct 16, 2013 10:12 am

Adding a gusset wouldn't be very hard to do. If I run into more problems, I will add one in.
Dan, Lord Commander of Nightfort, Barrington IL
User avatar
Dan of Nightfort
Recruit
Recruit
 
Posts: 25
Joined: Mon Aug 05, 2013 11:43 am
Started Fighting: 0- 0-2006
Realm: Nightfort - Barrington IL
Favorite Fighting Styles: Sword and Shield

Re: TUTORIAL: Suit Pants to Drawstring Pants

Postby Dan of Nightfort » Mon Dec 09, 2013 11:38 pm

I've been fighting in these for about 3 months now about once a week and they have needed one zipper area re-stitch and now have a hole in the left knee. It ripped while fighting in a gym with no knee pads (dumb on my part). The zipper re-stitch has held. I am going to do another one of these with the thicker wool suit pants soon. I'll update with how it goes!
Dan, Lord Commander of Nightfort, Barrington IL
User avatar
Dan of Nightfort
Recruit
Recruit
 
Posts: 25
Joined: Mon Aug 05, 2013 11:43 am
Started Fighting: 0- 0-2006
Realm: Nightfort - Barrington IL
Favorite Fighting Styles: Sword and Shield


Return to Medieval Arts, Sciences, and Garb

Who is online

Users browsing this forum: No registered users and 1 guest