Cutting even/consistent strips of foam?

Making Weapons and Shields

Moderator: Belegarth: Forum Moderators

Cutting even/consistent strips of foam?

Postby karpouzian » Sun Dec 21, 2014 11:22 pm

besides a locking wing divider for marking a cutting line, I'm wondering if there are any tools are tricks to enable me to cut and accurate blue foam strips?
karpouzian
Recruit
Recruit
 
Posts: 5
Joined: Thu Dec 11, 2014 12:49 pm
Started Fighting: 04 Dec 2014
Realm: Nan Belegorn
Favorite Fighting Styles: Sword and Board? Honestly not sure yet.

Re: Cutting even/consistent strips of foam?

Postby Sir Thurat » Sun Dec 21, 2014 11:40 pm

A leather strap cutter, such as this.

Also, I use a t-square and a straight edge. Get's me pretty much perfect cuts every time.
Realm of Carthage War Council Representative
Knight of Oldcastle
Realm Map Curator
Master Seneschal
User avatar
Sir Thurat
Skull Crusher
Skull Crusher
 
Posts: 1205
Joined: Tue Sep 05, 2006 7:21 pm
Location: Carbondale, IL
Started Fighting: 02 Apr 2006
Realm: Carthage
Unit: Clan of the Hydra

Re: Cutting even/consistent strips of foam?

Postby karpouzian » Mon Dec 22, 2014 9:11 am

I'm using a long, metal ruler for my strips, but they're still turning out a little wibbly wobbly, timey wimey as the rules moves slightly when I'm cutting up against it. Would the t-square help stop the ruler from moving?
karpouzian
Recruit
Recruit
 
Posts: 5
Joined: Thu Dec 11, 2014 12:49 pm
Started Fighting: 04 Dec 2014
Realm: Nan Belegorn
Favorite Fighting Styles: Sword and Board? Honestly not sure yet.

Re: Cutting even/consistent strips of foam?

Postby Brutus » Mon Dec 22, 2014 1:30 pm

You can also ask around to see if a friend or family member has a small band saw. Set the fence, and it's incredibly fast to cut as many strips as you need, perfect, every time. If you plan on doing a lot of smithing, they are about $100 and you can do amazing things with them.

Remember, when borrowing anyone's tools, don't be a tool: clean up your mess, and say thanks.
User avatar
Brutus
Only .3% Short Of Perfect
Only .3% Short Of Perfect
 
Posts: 671
Joined: Fri Apr 25, 2003 5:03 pm
Location: Alton, IL
Started Fighting: 0- 8-1999
Realm: Riverbend
Unit: Henneth-Annun

Re: Cutting even/consistent strips of foam?

Postby Sir Thurat » Mon Dec 22, 2014 3:20 pm

If your ruler is moving when you're cutting up against it, then make shorter cuts. When I cut strips, I do the following:

  • Figure out the exact width I want
  • Set that depth on my t-square
  • Using the t-square for measuring, make several marks along the foam for the length I need.
  • Line my ruler up with those marks. If the edge of your foam is even, they should line up.
  • Make cuts in between those points with a sharp razor, holding the ruler still with one hand.

You can also try gently clamping the ruler down on the foam on a work surface. If that doesn't work for you and you don't want to purchase a strip cutter, make your own jig.
Realm of Carthage War Council Representative
Knight of Oldcastle
Realm Map Curator
Master Seneschal
User avatar
Sir Thurat
Skull Crusher
Skull Crusher
 
Posts: 1205
Joined: Tue Sep 05, 2006 7:21 pm
Location: Carbondale, IL
Started Fighting: 02 Apr 2006
Realm: Carthage
Unit: Clan of the Hydra

Re: Cutting even/consistent strips of foam?

Postby Mordekiem » Mon Dec 22, 2014 4:39 pm

Part of it is simply practice. I've had alot of practice cutting things over the years. Drywall, cardboard, insulation, leather, etc.

but a couple tips. Use a sharp blade. This more than anything else makes cuts easier. Put a new blade in your knife before you start making key cuts.

consider getting a bigger/wider metal yard stick. There are some things you can do like use clamps as well. You can get a pair of quick clamps at the hardware store like harbor freight or home Depot.
User avatar
Mordekiem
Recruit
Recruit
 
Posts: 23
Joined: Mon Nov 04, 2013 4:26 pm
Started Fighting: 0- 9-2013

Re: Cutting even/consistent strips of foam?

Postby NessiePop » Tue Dec 23, 2014 11:59 pm

I do a lot of my foam-smithing on a floor, and I like to hold the ruler down with my hand near the top, and one of my feet (wear shoes for this) near the other end to ensure it doesn't move too much.
War Chief of Clan McClung
NessiePop
Barbarian
Barbarian
 
Posts: 359
Joined: Sun Jul 25, 2010 1:51 am
Location: Dothan
Started Fighting: 18 Jul 2010
Realm: Crimson Fields
Favorite Fighting Styles: Blatant Lies

Re: Cutting even/consistent strips of foam?

Postby Haardgrim » Sun Dec 28, 2014 3:00 am

If you are working in a well-ventilated space, you can use a hot-wire cutter (except on EVA foam). It's beautifully easy.

-Lars

Edited totcorrect auto-correct
Last edited by Haardgrim on Mon Jul 06, 2015 1:23 am, edited 1 time in total.
User avatar
Haardgrim
Monkey
Monkey
 
Posts: 159
Joined: Fri Apr 25, 2003 12:10 pm
Location: Munich, Germany
Started Fighting: 0-11-1998
Realm: Monachium

Re: Cutting even/consistent strips of foam?

Postby Brutus » Mon Dec 29, 2014 10:55 pm

Lars... can you find a link, perhaps on Amazon to what you're talking about? I'm completely unfamiliar with the tech. How fast does it cut? Even the smallest bandsaws will pretty much yawn at 2" thick 2# foam. Do these cutters similarly smile at mere foam?
User avatar
Brutus
Only .3% Short Of Perfect
Only .3% Short Of Perfect
 
Posts: 671
Joined: Fri Apr 25, 2003 5:03 pm
Location: Alton, IL
Started Fighting: 0- 8-1999
Realm: Riverbend
Unit: Henneth-Annun

Re: Cutting even/consistent strips of foam?

Postby Haardgrim » Sun Jan 18, 2015 5:42 am

Looks like my post got mangled. I meant a hot-wire cutter.

I use this one: http://www.proxxon-direct.com/acatalog/ ... MOCUT.html - and it's a fairly low-cost one.

It cuts nicely and quietly, and allows fairly complex cuts including slanted. It's probably not as fast as a quality band saw, but it's about as fast as I can effectively handle the foam.

-Lars
User avatar
Haardgrim
Monkey
Monkey
 
Posts: 159
Joined: Fri Apr 25, 2003 12:10 pm
Location: Munich, Germany
Started Fighting: 0-11-1998
Realm: Monachium

Re: Cutting even/consistent strips of foam?

Postby Sir Thurat » Sun Jan 18, 2015 5:58 pm

Do you find that it creates any fumes when you cut foam with it, Haardgrim?
Realm of Carthage War Council Representative
Knight of Oldcastle
Realm Map Curator
Master Seneschal
User avatar
Sir Thurat
Skull Crusher
Skull Crusher
 
Posts: 1205
Joined: Tue Sep 05, 2006 7:21 pm
Location: Carbondale, IL
Started Fighting: 02 Apr 2006
Realm: Carthage
Unit: Clan of the Hydra

Re: Cutting even/consistent strips of foam?

Postby Haardgrim » Tue Jan 20, 2015 7:37 am

For regular camping mat-style foam, slight fumes, not nearly as nasty as DAP fumes. For Evacell foam, the fumes are really nasty, plus it doesn't cut it well at all.
User avatar
Haardgrim
Monkey
Monkey
 
Posts: 159
Joined: Fri Apr 25, 2003 12:10 pm
Location: Munich, Germany
Started Fighting: 0-11-1998
Realm: Monachium

Re: Cutting even/consistent strips of foam?

Postby Wid Lewin » Mon May 18, 2015 9:14 pm

I've made up a foam cutter, which consists of a pair of threaded rods attached to a base that can be used to lock a long snap razor to the rods. It is adjustable and easily used to cut multiple strips of foam to the same width. It was cheap to make and takes very limited skill to operate. I will get a pic or two and post it up in the next little while.
Wid Lewin
Recruit
Recruit
 
Posts: 4
Joined: Thu Aug 07, 2014 9:17 pm
Started Fighting: 0- 0-1994
Favorite Fighting Styles: S&B
Archery

Re: Cutting even/consistent strips of foam?

Postby Wid Lewin » Tue May 19, 2015 9:47 am

Posted up the photos of the foam cutter here http://imgur.com/a/o1edg
Wid Lewin
Recruit
Recruit
 
Posts: 4
Joined: Thu Aug 07, 2014 9:17 pm
Started Fighting: 0- 0-1994
Favorite Fighting Styles: S&B
Archery

Re: Cutting even/consistent strips of foam?

Postby Sir Thurat » Tue May 19, 2015 10:24 am

That's a cool idea. Thanks for posting a photo.
Realm of Carthage War Council Representative
Knight of Oldcastle
Realm Map Curator
Master Seneschal
User avatar
Sir Thurat
Skull Crusher
Skull Crusher
 
Posts: 1205
Joined: Tue Sep 05, 2006 7:21 pm
Location: Carbondale, IL
Started Fighting: 02 Apr 2006
Realm: Carthage
Unit: Clan of the Hydra

Re: Cutting even/consistent strips of foam?

Postby Haardgrim » Thu Oct 15, 2015 2:23 am

I got some sheets of Stratocell recently and timed cutting and trimming fries with the hot-wire cutter. I got up to as fast as cutting 2 fries per minute, half as much when cutting through the "skin" of Stratocell s Plus. So basically cutting nice, even cuts is not a time sink. I love that thing!

-Hårdgrim Bonebreaker of Monachium
User avatar
Haardgrim
Monkey
Monkey
 
Posts: 159
Joined: Fri Apr 25, 2003 12:10 pm
Location: Munich, Germany
Started Fighting: 0-11-1998
Realm: Monachium


Return to Foam Smithing

Who is online

Users browsing this forum: Google [Bot] and 9 guests